LK-201 
 (Urea-formaldehyde resin) 

 Use, features LK-201 is the wooden one-component synthetic resin powder, easy to use, add water to use, it applies to furniture assembly, mortise wood pieces, wood mosaic, wood glue, lamination sheets, veneer sheets and so on. 

 Li Kai brand high-quality wood powder is powdered wood adhesives can be used cold or hot in the timber industry has been widely used, use the following steps: 

 Use 

 1, the gel: Weigh the weight of powder, add water in proportion (weight ratio: 5 copies of powder to 3 parts water) stir, pay attention to the water edge to increase gradually while stirring, so easily dissolved powder, less prone to Baotuan phenomenon. The proportion of Duishui users may need to adjust itself to be suitable for their own use of moderate viscosity glue, generally used mortise, finger and other small area of the user is appropriate to reduce the adhesion against water, and large areas of plate and fight board recommended against the amount of water be increased. After adjusting the application of glue on and the temperature is inversely proportional to the higher temperatures for shorter (for adjustment of the plastic is a good time to gel) 
 Application of temperature 
 6 ~ 3 hours 10 ~ 20 ℃ 
 3 ~ 20 ~ 30 ℃ 2 hours 
 2 to 1 hour 30 ~ 40 ℃ 
 Users should be based on high and low temperature for the length of the gel to determine the amount of time to avoid waste. The large amount of glue, the gel more each recommended the use of electric mixer for customers the gel, can save time and effort. 

 2, the sizing: sizing available manual plastic knife, plastic brush, a large area can be a plastic laminating machine, glue bonding surface before the note should be flat, smooth, fit, glue the general control of the amount of 150 ~ 160g/m2 (Single) 

 Packing: 20kg / Bag Shelf life: 2 years (moisture)