LK-02 
 Overview LK-02 free nail nail glue is a professional designed as an alternative high-intensity professional bonding products, the surface without the need to drill, has a good waterproof function, high-grade, high strength. For wood, stone, structure, floor installation, aluminum, galvanized iron, steel, concrete, etc. Most of the bonding material. 
 Adhesion properties of high strength, good flexibility, fast and easy installation, can be used inside and outside, with a waterproof, suitable for bonding with the wall mirror. 
 Surface bonding surface must be clean, dry, no grease, no wax and loose paint. 
 Instructions for use nail glue products can be used to avoid double-sided adhesive bonding method and construction method. Ambient temperature is below 30 ℃ can be used to maintain the best condition. Surface treatment has been completed the adhesive surface, out of 4-6 cm in diameter plastic nail-free plastic columns, plastic columns (adhesive dots) the distance between the less than 40 cm, and then the two adhesive surface compaction and let it firmly bonded. 
 Double-sided adhesive gel method were evenly applied to the two bonding surface, so that the two surface compaction rolling full uniform distribution of gel in the middle, then pull the two adhesive surfaces, drying to a smooth plastic surface close to the two Table dry state (about 3-5 minutes, according to the construction environment), followed by re-positioning. Can beat a hammer or mold surface, maximizing the contact surface to achieve maximum bond strength. 24-72 hours of mechanical fastening is necessary. 
 Single bonding method (recommended for load-bearing shear plate or to sustain a larger load area bonding). Will be evenly applied to an adhesive gel surface, and then bonding with another surface compaction, and fixed with clamping fixtures, let it dry and Xu fixtures after the split. Free nail adhesive glue applied to the floor, you can avoid through good flexibility, long-term use in the floor creaking sound produced is a manufacturer of construction and installation of the floor the best choice. Into the floor when using the plastic groove, and then put together with the tab bonding, force compaction, until fully dry. 
 Clean the excess uncured adhesive resin turpentine or spatula can be removed, the gel can be cured with a scraper or sandpaper to remove eradication. 
 The amount of 320 grams of the product can be extruded tube diameter of 6 mm plastic column around 10 meters. 
 Stored away from direct sunlight stored in well-ventilated, temperature about 25 ℃, indoor environment and avoid direct contact with children. 25 ℃, the shelf life of 12 months. 
 Safety Tips is flammable, take care of releasing the gas, construction and operation of a large number of deliberate inhalation of harmful gases released in good health. Avoid using and storing the source close to the fire, sparks and other flammable materials. Construction to avoid direct contact with skin and eyes, avoid the large release of gas inhalation. Please keep within the construction environment ventilation. Construction process to keep away from heat, fire, sparks and other combustible materials. In case of sudden and unexpected, please immediately contact the doctor and doctor.